How to record a remote interview in your browser
Open a browser studio, invite your guest with a link and record without streaming anywhere. In evmux, switch off every destination and the Go Live button becomes Record. Tick Recording for the finished 1080p video and Local Recording (ISO) for a separate file of each person, recorded on their own computer in up to 4K, then download, trim and clip it from your dashboard.
In short
- You can record a full interview with guests, scenes and graphics without sending anything to a platform.
- Guests join from a link in Chrome or Edge, with no account and no download.
- Cloud recording gives you the finished show in 1080p. ISO recording gives you each person separately in up to 4K for editing.
- Switch recording on before you press Start. It cannot be added halfway through.
- Everyone should keep the studio tab open after the interview until their ISO upload reaches 100%.
- Headphones for everyone and a microphone close to the mouth matter more than any setting.
Can I record an interview without going live?
Yes. Recording first and publishing later is often the better choice for interviews. You can stop and restart a question, cut the small talk, and publish an edited version when it suits you.
In evmux, a recording-only session is the same studio you would use to go live, with scenes, guests, lower thirds and branding. The difference is that nothing goes out:
- Open your studio and switch off every destination.
- The button in the header now reads Record instead of Go Live.
- Click it, tick Recording, and tick Local Recording (ISO) if you want a separate file for each person.
- Press Start. When you finish, end the recording and confirm.
Tick the recording options before you press Start. Recording cannot be switched on in the middle of a session. See recording for the full feature.
How do guests join the recording?
Guests join with a link, from their browser, with no account and no download.
- In the studio, click Invite Guest at the bottom left and copy the link, or send it by Gmail or email.
- Your guest opens the link in Chrome or Edge on a computer, checks their camera and microphone, types their name and enters the studio.
- They wait off-stage. You can talk to them, but they are not on the scene yet.
- Hover their tile and click Add to Scene. On the Dynamic Scene, the layout arranges itself.
Guests on an iPhone or iPad get the mobile version of the studio, with fewer features. For an interview you plan to edit, ask guests to use a computer. Safari on a Mac and Firefox are not supported.
If you interview the same people often, add them as speakers in the dashboard. Their name, title and company then fill their lower third every time, without typing. More on inviting guests.
Cloud recording or local ISO recording: which do I need?
They do different jobs, and you can use both in the same session.
| Cloud recording | Local recording (ISO) | |
|---|---|---|
| What it records | The finished scene, as a viewer would see it | Each person’s own camera and microphone, separately |
| Where it records | In the cloud | On each participant’s own computer |
| Quality | 1080p | Each camera’s own resolution, up to 4K |
| Affected by internet drops | Yes | No, the file uploads afterwards |
| Ready | Shortly after you finish | After each person’s upload completes |
| Best for | Publishing quickly as one video | Editing, separate audio tracks, multi-camera cuts |
For a podcast or interview you will edit, turn on both. The cloud file is a quick reference and a backup. The ISO files give your editor each voice on its own track, so one person coughing does not ruin the other person’s answer. ISO files can be Video + Audio or Audio only.
How do I get good audio from a remote guest?
Most bad interview audio comes from the room and the equipment, not the software. Send your guest a short checklist a day before:
- Wear headphones. Speakers send your voice back into their microphone and create echo.
- Use a microphone close to the mouth. A USB microphone or a headset beats a laptop microphone across the desk.
- Pick a quiet, soft room. Close windows and doors. Curtains, a rug and a sofa reduce echo.
- Use a wired connection if possible, with an upload speed of at least 3 Mbps.
- Plug in the laptop and close other video apps.
In evmux, each person can turn on AI noise reduction in Settings, then Audio. It removes fans, traffic and keyboard clicks before the voice reaches the recording. Leave echo cancellation off while it runs, because the two filters compete. As the host, you can open a guest’s settings from the three-dots menu on their tile, and they approve the first request.
Before you start, have everyone try Record & Listen in the Test audio section of the same Audio settings. It records five seconds and plays them back as others will hear them. Then ask each person to speak in turn and balance them with the Volume slider in their tile’s three-dots menu. Raise the quiet voice rather than lowering the loud one. The audio tools explain each control.
What happens after the interview?
Wait for the ISO uploads. ISO files are saved on each person’s computer during the interview and upload in the background. The cloud indicator in the header opens Local recording status, with one row per person: rec while recording, then a percentage while their file uploads. Ask everyone to keep the studio tab open until their row reaches 100%. If someone closes it early, opening the studio again in the same browser on the same computer continues the upload. Do not record in a private or incognito window, and do not clear the browser’s data for evmux before the upload finishes.
Find the files. Recordings appear in the dashboard under Recordings, one file for the program and one for each participant.
Edit and reuse. From the Recordings page you can:
- Download the video, the audio only, or the chat log.
- Trim the start and end.
- Download an automatic transcript, with language detection, as an SRT file.
- Cut vertical shorts with burned-in captions, and edit the transcript word by word.
- Let AI pick the best moments and turn them into short clips, with a summary of the session.
- Post a recording or clip to YouTube, Facebook, LinkedIn or TikTok.
If you run a regular show, the live podcast page shows how the same setup works when you also stream the episode live.
What should I check before my first remote interview?
- Run a five-minute test recording with the guest on the same computer and network they will use.
- Download the test and listen on headphones for echo, hum or clipping.
- Confirm everyone’s ISO row reached 100% and the files are in the dashboard.
- Check free disk space on your computer. The studio warns when space for recording is low.
- Agree on the plan with the guest: rough questions, length, and whether you may stop and repeat an answer.
Once one test works, keep the same setup for every episode. The interview is the hard part. The recording should be the part you never have to think about.