How to live stream religious services: setup and tips

The evmux teamUpdated 6 min read

To live stream a religious service you need one to three cameras, a clean audio feed from your sound desk, a computer on a wired connection and streaming software a volunteer can run. Build a scene for each part of the service in advance, stream to the platforms your community already uses, and record every service so people can watch it later.

In short

  • Sound matters more than picture. Take a feed from the sound desk instead of relying on a microphone in the room.
  • A USB webcam is enough to start. Cameras with HDMI output connect through a capture card and show up like a webcam.
  • Build the same scenes every week: countdown, welcome, music, readings, the main talk, announcements and closing.
  • Stream to YouTube and Facebook at the same time, and embed the service on your own website if you want people to watch there.
  • Recorded music usually needs permission for streaming, even if your building already holds a performance license.

What equipment do you need to stream a service?

Start with what you have and improve one piece at a time.

  • Cameras. A good USB webcam at the back of the room is enough for a first service. Camcorders and mirrorless cameras with a clean HDMI output connect through a capture card, which the computer treats as a webcam. In evmux a host can run up to three cameras, for example one wide shot of the front and one closer shot of the speaker.
  • A hardware encoder or switcher, if you already own one. Its output can come into evmux as a layer through the RTMP ingest app, so you do not have to replace equipment that works.
  • A computer and a browser. evmux runs in Chrome, Edge and other Chromium browsers on Windows or Mac. Safari and Firefox are not supported. Nothing needs to be installed.
  • A wired internet connection. Wi-Fi in a full building is crowded by everyone’s phones. Run a cable to the streaming computer if you can.
  • Light on the front. Speakers lit from above or from behind look dark on camera. A pair of soft lights pointed at the lectern or stage fixes most rooms.

How do you get good audio from the sound desk?

Most complaints about religious live streams are about sound. A microphone near the camera picks up echo, the congregation and the air conditioning. Take a feed from the sound desk instead: an auxiliary or record output into a USB audio interface, or the desk’s own USB output if it has one. The computer then sees the desk as a microphone.

In evmux, pick that input in Settings under Audio and use the mic test, which records a few seconds and plays them back the way viewers will hear them. AI noise reduction is built for speech and processes audio in mono. For music in stereo, turn AI noise reduction, echo cancellation and background noise reduction off, then test again. Ask whoever runs the desk for a separate mix for the stream, since what sounds right in the room is often too quiet or unbalanced online.

How do you make it simple for volunteers?

Volunteers change from week to week, so the setup should not depend on one person’s memory.

  1. Build the scenes once. Set them up before the first service and reuse them every week.
  2. Write a one-page run sheet. List each part of the service, the scene to switch to and who is speaking.
  3. Start on a countdown. Go live a few minutes early with the Countdown Timer app on screen. When it reaches zero, Auto Switch Scene can move to the opening scene on its own.
  4. Use one-click layouts. The Dynamic Scene arranges cameras and guests for you, so a volunteer picks a layout instead of moving boxes around.
  5. Rehearse with a recording. Record a short practice without going live, watch it back, and fix what looks or sounds wrong.

The religious services page shows a full running order for a weekly service in evmux.

Which scenes should a service have?

Part of the service What is on screen
Before it starts Countdown, your logo, quiet music
Welcome Wide shot of the front, the leader’s name
Music Wide shot, words on screen if you have permission to show them
Readings The speaker beside the text in large type
Main talk Closer shot of the speaker, name and title
Announcements Slides, a scrolling ticker for events, a QR code
Closing Wide shot, how to stay in touch, next service time

Readings on screen. Prepare texts as PDF slides, or type them into the Live Text app, which you can edit and highlight while you are live. For Bible verses, the Holy Bible app takes a reference, offers ten translations in five languages and steps through verses with Prev and Next. Put Next on a fast action button so the volunteer can follow the reader with one click.

Names for speakers. Show a lower third with each person’s name and role when they first speak. In evmux you can save regular speakers in the dashboard, so their name and title fill in every time.

Donations. The QR Code app links to your donation page and can show your logo in the center. Make it large enough to scan from a phone held at arm’s length, leave it on screen for a while, and say out loud what it is for.

Comments. A volunteer can click a viewer’s comment, such as a greeting or a request for prayer, to show it on screen with the person’s name.

Where should you stream: YouTube, Facebook or your own website?

Go where your community already watches. Many communities stream to both YouTube and Facebook. With multistreaming the same service goes to both at once, plus other platforms if you add them. Facebook can be your profile, a Page or a group, and a group needs admin rights.

Two settings save trouble:

  • Schedule the stream. Schedule for later in evmux creates the upcoming live post on YouTube and Facebook with a title, description and thumbnail, so people can find it before you start. You still click Go Live yourself on the day.
  • Check Facebook privacy. A stream on a Facebook profile is friends-only by default, and comments only reach the studio if it is public. Run a short test stream before the first real service.

To keep people on your own website, add the evmux Player as a destination and paste its embed code into a page. It has its own chat, and you can stream to it and to YouTube and Facebook at the same time. evmux does not handle registration or tickets, so if a service should be private, embed the player on a page behind your own login.

How do you handle recordings and replays?

Record every service. evmux records the program in 1080p while it streams. Afterwards you can trim the start and end in the dashboard, download the video and a transcript, and post short clips to social platforms.

A recording can also air again as a pre-recorded livestream at a set time, for a second time zone, a midweek replay or people who work during the service. It starts on its own, with no one in the studio.

What about music and filming the congregation?

Streaming music raises rights questions that a building license may not cover. Live performance of copyrighted songs, recorded tracks played in the room and lyrics shown on screen can each need permission for streaming. Platforms can mute, block or remove streams that contain music they detect as copyrighted. Ask the licensing organizations that serve communities in your country what covers streaming, and leave out what you cannot license.

People also have a right to know they may be on camera. Point cameras at the front rather than the seats, put a notice at the entrance, and offer seating that is out of shot. Ask before filming children, and do not stream private moments that name individuals without their agreement.

Questions, answered

Do we need a hardware video switcher?

No. A streaming studio on the computer switches between cameras, slides and graphics for you. A switcher helps when you already own one or run many cameras, and its output can come into evmux through a capture card or the RTMP ingest app.

Can the stream show live captions?

Not in evmux. It does not create live speech-to-text captions. After the service you can download a transcript of the recording as an SRT file and add it to the video you publish.

Should we stream the whole service or only part of it?

Stream the parts that work on screen and that you have permission to share. Many communities leave out music they cannot license, private moments such as personal prayers or blessings for named people, and anything said by people who did not agree to be filmed.

How many volunteers does it take?

One trained person can run a simple stream. Two is more comfortable: one switches scenes and graphics while the other watches comments and the sound.

Your next show starts in a browser tab.

Set up your studio in minutes. Your first stream is free.